PRIME™ Infusion Systems

PRIME™ Infusion Systems

  • Infusion Systems

Infusion Systems

PRIME™ infusion systems applications range from single-operation moulding of carbon yacht masts, up to 80' yacht hulls and wind turbine blades.  PRIME™ epoxy infusion systems have been used successfully for over 20 years and today are at the forefront of the development of liquid epoxies for "under the bag" infusion processes, including:

  • SCRIMP™
  • RIFT (resin infusion under flexible tooling)
  • VARTM (vacuum assisted resin transfer moulding)

PRIME™ 37 Low Toxicity Epoxy Infusion System

PRIME™ 37 has been developed to deliver exceptional laminate quality for a range of liquid infusion composite processes.  Gurit’s unique fibre wetting technology reduces infusion time and improves laminate quality

Gurit fibre wetting technology

The cure characteristics of PRIME™ 37 have also been optimised:

  • Mixed viscosity remains lower for longer
  • Faster through-cure, avoiding a low-strength “sugary” phase
  • Improved exotherm control

PRIME™ 37 is Lloyd's certified and is produced with bio-based content as standard.  By using the award winning Ampreg™ 3X low toxicity hardeners, PRIME™ 37 has market leading health and safety, and also allows customers to take advantage of the blend-able hardener speeds which can be tailored to suit each application.

Product Selector

Ampreg 3X Hardeners

System Properties

Mixed Viscosity

150g Gel-Time

Mix ratio

  Cured Tg
  Certifications

PRIME™ 37

 Ampreg™ 3X Fast Hardener

500 cP

1/2 hour

100:29
(parts by weight)

  Up to 75oC

 Lloyd's Register

DNV (Pending)
 Ampreg™ 3X Slow Hardener

175cP

4 hours
 Ampreg™ 3X Extra-slow Hardener

150 cP

10 1/2 hours
 PRIME™ High Tg Hardener

500 cP

5 hours

100:25
(parts by weight)

  Over 100oC
  DNV

For further information, please see the related documents on the side bar or contact your customer support representative.

 

Case Studies

  • Magma Composites
    Magma Composites

    Magma Composites, with the help of Gurit’s distributor in France, Composites Distribution, used Gurit PRIME™ 37 Infusion system to make 40mm thick glass and carbon UD panels for a foiling project.

    Download (PDF)

  • Neo 570C
    Neo 570C

    The Neo 570c project commenced in earnest in 2019. Working with longtime partner and Gurit distributor Resintex, the NEO team selected a full complement of Gurit products to achieve the weight savings needed, opting for a full prepreg carbon fiber hull, deck, structure and interior.

    https://neoyachts.com/

    Download (PDF)

  • Maverik Moth
    Maverik International Moth

    Fluid Composites are the manufacturer of the Maverik International Moth, a foiling dinghy, with historic roots dating back nearly 100 years.
    The Maverik International Moth Incorporates a full package of Gurit materials including Corecell™ M foam, Spabond™ and PRIME™ 37.

    https://fluidcomposites.co.uk/

    Download (PDF)

  • Airborne
    Airborne

    For large infusions involving relatively thick sections, being able to control the reactivity is key. When using Gurit’s new PRIME™ 37 system, Airborne were pleased to note that this system combined familiarity with improved performance and the ability to control their process to an exceptional degree. This greatly benefits them whether it be manufacturing a large composite gangway, or during RTM processes involving very thick laminates.

    https://www.airborne.com

    Download (PDF)

  • Southern Wind
    Southern Wind

    The Southern Wind and Gurit partnership including full package solution of materials, structural engineering and technical support, has delivered some amazing results: Smart custom performance sailing yachts which hit the sweet spot between customization and standardization, design and reliability and between performance and comfort.

    https://www.sws-yachts.com/

    Download (PDF)

Magma Composites

Neo 570C

Maverik International Moth

Airborne

Southern Wind