Multi-purpose epoxy system

Our award winning, latest generation multi-purpose epoxy system

AMPRO™

MULTI-PURPOSE EPOXY SYSTEM
AMPRO™ BIO

BIO-BASED MULTI-PURPOSE EPOXY
AMPRO™ FILLERS

BONDING AND FILLING MIXES
  • Multipurpose

AMPRO™ one epoxy system, many uses…

AMPRO™ is an award winning, latest generation multi-purpose epoxy system from Gurit.  It is a simple to use, all-purpose epoxy which can be used for bonding, coating, laminating and filling. 

AMPRO™ How-to video tutorials

  • 1
    Workspace and substrate preparation

    How to prepare your workspace before you start to ensure the best results with the AMPRO™ epoxy laminating system.

  • 2
    Dispensing and Mixing

    This how to video explains basic methods for dispensing and mixing the epoxy; such as syringes, volumetric cups or pumps, plus a no-calculation-needed weighing method using Gurit SCALES.

  • 3
    Coating

    Best practice methods for applying AMPRO™ as a coating on wood and other substrates.

  • 4
    Filleting

    A high strength inside corner-joint bonding technique with AMPRO™.

  • 5
    Sheathing

    A method of applying AMPRO™ as a protective coating to a substrate.

  • 6
    Bonding

    Using AMPRO™ for general, cosmetic and load-carrying applications.

  • 7
    Filling and fairing

    Ideal for spot-filling or surface fairing with AMPRO™, above and below the water-line.

  • 8
    Gurit AMPRO™: a multi-purpose epoxy laminating system

    AMPRO™ is a versatile two-part epoxy system for coating, bonding, filling, fairing, sheating & filleting.

1

Workspace and substrate preparation
2

Dispensing and Mixing
3

Coating

4

Filleting

5

Sheathing
6

Bonding
7

Filling and fairing
8

Gurit AMPRO™: a multi-purpose epoxy laminating system

AMPRO™

LOW TEMPERATURE CURING MULTIPURPOSE SYSTEM

  • SP 106 re-engineered
  • 3 : 1 mix ratio by volume
  • No surface residue, even at +5°C
  • For bonding, laminating & filling
  • Available with Fast (F), Slow (SL) & Extra-slow (XS) hardeners
  • Download Datasheet

AMPRO™ BIO

BIO-BASED EPOXY MULTIPURPOSE SYSTEM

  • Accredited bio-based system
  • 3 : 1 mix ratio by volume
  • No surface residue, even at +5°C
  • For bonding, laminating & filling
  • Available with Fast (F), Slow (SL) & Extra-slow (XS) hardeners
  • Download Datasheet

AMPRO™ FILLERS FOR BONDING AND FILLING MIXES

Glass BubblesGB

WATERPROOF FILLING & BONDING

  • White, hollow glass spheres for waterproof filling and bonding
  • Ideal as a finishing filler for hard wearing edges & surfaces
  • Refer to the AMPRO™ datasheet for recommended mixes

MicroballonsMB

WOOD FILLING & BONDING

  • Brown, hollow phenolic resin spheres ideal for wood applications
  • Easy to profile and sand for filling, filleting and bonding
  • Refer to the AMPRO™ datasheet for recommended mixes

MicrofibresMF

STRUCTURAL BONDING

  • Opaque, very fine cellulose wood fibres for structural bonding
  • Suitable for both wood and GRP
  • Refer to the AMPRO™ datasheet for recommended mixes

AMPRO™ SILICAAS

WATERPROOF RESIN THICKENER

  • Fine waterproof, white powder, used to thicken the epoxy system
  • Can be used with Glass Bubbles, Microballoons and Microfibres
  • Refer to the AMPRO™ datasheet for recommended mixes
  • Download Datasheet

Case Studies

  • Optimist Workshop

    The Optimist Workshop, Switzerland, are a long-time user of the AMPRO™ multi-purpose system. AMPRO™ was used on this project of restoring a kirsch boat to its former glory.

    www.optimisten-werkstatt.ch

    Download (PDF)

  • Neo 570C
    Neo 570C

    The Neo 570c project commenced in earnest in 2019. Working with longtime partner and Gurit distributor Resintex, the NEO team selected a full complement of Gurit products to achieve the weight savings needed, opting for a full prepreg carbon fiber hull, deck, structure and interior.

    https://neoyachts.com/

    Download (PDF)

  • Rudder
    Miracle Dinghy Rudder

    Steve Main, Senior Technical Support Engineer at Gurit, demonstrates the step by step process of manufacturing a replacement rudder for a Miracle dinghy using Gurit AMPRO and Corecell.

    Download (PDF)

  • Frog Sails
    Frog Sails

    Sven Kraja, owner of FROG-Sails in Germany, has been a boatbuilder for over 30 years and has worked with epoxies all his professional life. He used Gurit AMPRO™ in the manufacture of his land yachts, having previous experience with several other epoxy systems for the repair and construction of composite structures.

    https://frogsails.de/

    Download (PDF)

Optimist Workshop

Neo 570C

Miracle Dinghy Rudder

Frog Sails